Troubleshooting guide
Synology Tailscale Not Connecting: When Tailscale Shows Connected but the NAS Share Is Unreachable
Category: Remote Access
You are remotely connected through Tailscale, the client says connected, but SMB or DSM on your Synology NAS will not open. This is the classic synology tailscale not connecting symptom where the tunnel is up but the share is unreachable, so work through the checks below before changing anything.
Confirm the Tailscale IP and ping path
Open the Tailscale client on the remote device and note the NAS Tailscale IP (usually 100.x.x.x). Ping that address. If ping fails, the tunnel is not actually passing traffic; if ping succeeds but SMB fails, the problem is above the network layer. Also confirm the NAS shows as connected in the Tailscale admin console, not just the client.
Check the NAS service and firewall
On the NAS, open Control Panel and verify SMB is enabled and DSM is listening on the expected ports (5000/5001 for DSM, 445 for SMB). Then check the Synology firewall: if it is enabled, confirm the Tailscale interface is allowed, or temporarily disable the firewall rule set to test. A firewall that permits only the LAN interface will drop Tailscale traffic even though the tunnel is connected.
Verify SMB binding and share permissions
In File Services, confirm SMB is bound to all interfaces or includes the Tailscale interface. Then check that your user account has permission to the specific shared folder. A connected tunnel with no share permission looks identical to a broken connection.
Run the verification test
From the remote device, run ping <NAS-Tailscale-IP> and then open \\<NAS-Tailscale-IP>\share (Windows) or smb://<NAS-Tailscale-IP>/share (macOS). If ping succeeds and the share opens, access is restored. If ping succeeds but the share still fails, recheck the firewall and SMB binding.
Rollback note
If a firewall or SMB change makes things worse, re-enable the previous rule or binding immediately and retest local LAN access before continuing.
If these checks do not restore the share,
