Troubleshooting guide

Synology Tailscale ACL Blocked: When the Firewall Drops Remote Traffic

Category: Remote Access

You are connected to Tailscale on your phone, the NAS shows online, yet every remote request dies at the firewall before you can finish a controlled diagnosis.

Confirm the block is at the firewall layer

Open DSM, then Control Panel > Security > Firewall. Select the profile currently applied to the Tailscale interface (usually the default profile unless you created a dedicated one). Check whether the rule order lets Tailscale traffic reach DSM before any deny rule. A common mistake is a broad deny-all rule sitting above the allow rule for the Tailscale subnet 100.64.0.0/10 or for the specific tailscale0 interface.

Next, open Package Center and confirm Tailscale is running, then check Control Panel > Network > Network Interface for tailscale0. If the interface is up but no allow rule references it, the firewall is dropping traffic even though Tailscale reports connected. That is your synology tailscale acl blocked condition in practice.

Apply a minimal, testable rule

Create an allow rule above the deny rules: source 100.64.0.0/10, destination your NAS, service DSM (5000/5001) plus any share ports you need. Save and apply the profile. Do not disable the firewall entirely; keep the change narrow so you can attribute the result.

Verification test

From the remote device, disconnect and reconnect Tailscale, then load DSM at the NAS Tailscale IP. If the login page appears within a few seconds, the firewall path is open. If it still times out, recheck rule order and interface binding.

Rollback note

If the new rule breaks local access, edit the profile and move the allow rule back below your existing LAN rules, or delete it and reapply. Keep a note of the original order before saving.

If rule order and interface binding both look correct and traffic still drops,

A phone on cellular data opening a Synology share through Tailscale

Ask for help with your profile export.


Back to the service page · Ask about this exact symptom